|
 
Bolt-on bars
feature aluminum vertical and cross bracing, 4130 chrome moly tubing, adjustable
mono strut or fixed dual struts, all hand TIG welded with natural finish, polyurethane
shielded bearing wheels, rod ends and all necessary hardware. Each kit
is designed with approximately 60” between motorcycle rear axle and
wheelie bar wheels.
Wheelie bar
accessories are located at here. |
|
Sorry, No Photo |
These wheelie bars mount to the struts included with the
kit. The struts replace the rear shocks. 65” Bar,
10¾” Dual
struts.
GS750 All Years
GS850 All Years
GS1000 All Years
GS1100 All Years |
|
65S |
Suzuki Drag Bracer Bars -
Cannot be ordered online. Please call 608-339-7999 to order. |
|
|
 |
 
Top tube of wheelie bars mount to a special bracket attached
to the passenger peg bracket. Bottom wheelie bar tubes
mount to a tab that must be welded to the swingarm.
GSX13R 1999-2007 |
|
GSX13R |
Suzuki Drag Bracer Bars -
Cannot be ordered online. Please call 608-339-7999 to order. |
|
|
 |
 
Top tube of wheelie bars mount to a special bracket attached
to the passenger peg bracket. Bottom wheelie bar tubes
mount to a tab that must be welded to the swingarm.
GSX13R 2008 |
|
GSX13R08 |
Suzuki Drag Bracer Bars -
Cannot be ordered online. Please call 608-339-7999 to order. |
|
|
|
 |
 
Top tube of wheelie bars mount to a special bracket attached
to the passenger peg bracket. Bottom wheelie bar tubes
mount to a bracket that replaces the rear axle adjuster
block. See above photos.
GSXR1000 2006 |
|
GSXR1006 |
Suzuki Drag Bracer Bars -
Cannot be ordered online. Please call 608-339-7999 to order. |
|
|
 |
 
Top tube of wheelie bars mount to a special bracket attached
to the passenger peg bracket. Bottom wheelie bar tubes
mount to a bracket that replaces the rear axle adjuster
block. See above photos.
GSXR600 2000-2004
GSXR750 2000-2004
GSXR1000 2000-2004 |
|
GSXR7500 |
Suzuki Drag Bracer Bars -
Cannot be ordered online. Please call 608-339-7999 to order. |
|
|
Sorry, No Photo |
Top tube of wheelie bars mount to a special bracket attached
to the passenger peg bracket. Bottom wheelie bar tubes
mount to a bracket that replaces the rear axle adjuster
block. See above photos.
GSXR600 1997-1999
GSXR750 1996-1999 |
|
GSXR7596 |
Suzuki Drag Bracer Bars -
Cannot be ordered online. Please call 608-339-7999 to order. |
|
|
 |
 
These wheelie bars mount to a special clamp that attaches to
the swingarm.
See above photos.
GSXR750 1986-1987
GSXR1100 1986-1988 |
|
GSXRE |
Suzuki Drag Bracer Bars -
Cannot be ordered online. Please call 608-339-7999 to order. |
|
|
Drag Bracer Bar Side Panels |
|
Don’t destroy
the custom paint job on your motorcycle. These lightweight
fiberglass panels make it easy to show off sponsor decals.
Panels have a black gelcoat finish and are ready to paint.
Designed to fit Pingel mono shock or dual shock wheelie bar
kits. May be adaptable to other wheelie bar kits. Sold in
pairs. Mounting hardware not included - wire ties are most
often used to secure panels to wheelie bars. |
|
229 |
Side panels cannot be ordered online. Please call 608-339-7999 to order. |
$86.95 |
|
230 |
Side panels cannot be ordered online. Please call 608-339-7999 to order. |
$86.95 |
|
Drag Bracer Bar Wall Mounts |
|
 
Pingel offers wall mounts for your wheelie bars, handlebars,
brooms, etc. These mounts will keep your bars from getting
banged around in the trailer, or get them up and out of
harm’s way in the shop. CNC machined nylon brackets with
positive closing and locking mechanism will not shake or get
bumped out of position. Available for ¾” bars or 7/8” bars.
Includes 3 brackets. |
|
WBMB34 |
Wall mounts for ¾” diameter wheelie bars - black
nylon |
|
 |
|
WBMB38 |
Wall mounts for 7/8” diameter wheelie bars - black
nylon |
|
 |
 |
 |
Drag Bracer Bar Wheels come complete with 5/16” I.D.
bearings. Sold in pairs. |
|
PWB |
PWBCN |
|
|
|
PWB |
Black Wheels |
|
|
|
PWBCN |
Convex Black Wheels - less weight, more aerodynamic and have
less rolling resistance than standard wheels |
|
|
| Design your own wheelie
bars. If our Universal
Drag Bracer Bars® will not work for your
application, we can build and ship custom Drag Bracer Bars®
in 2 days. We will need these measurements: |
|
|
1. TOP TUBE LENGTH - use
a tape measure and measure from the top tube mounting hole
back to your desired length (remember, the wheelie bar
wheels will be off the ground approximately 2”).
TOP TUBE MOUNTING HOLE DIAMETER our standard is 3/8”
with counter-bored end. If mounting in a channel, give the
channel width dimension.
2. BOTTOM TUBE LENGTH - use a 2nd tape measure to
measure from the bottom tube mounting hole back to your top
tube length dimension on 1st tape measure. |
|
3. MOUNTING WIDTH - if
you have mounting tabs, measure from outside of the left tab
to outside of the right tab. If you have a mounting channel,
measure from the inside of the left channel to the inside of
the right channel and also channel width.
4. TOP TUBE MOUNTING TO
BOTTOM TUBE MOUNTING DISTANCE - measure from the top
tube mounting hole to the bottom tube mounting hole. |
|
Custom Drag Bracer Bars cannot be
ordered online. Please call 608-339-7999 for pricing and to order. |
|
