HomeAll ProductsContactsPrice ListDealer ApplicationOrder a CatalogSearch

Harley-Davidson V-Rod Nitrous Oxide Kit
Bolt On Kit - No Fabrication Required!
Bolt it on, fill the tank, push the button, HANG ON!

Pingel Enterprise, Inc. has designed a completely bolt on nitrous kit for the Harley-Davidson V-Rod. This “wet kit” can easily and safely increase the stock 107hp to over 140hp at the rear wheel! That is an increase of 35% on a stock engine! We have designed all the brackets and mounts you will need for the installation. The kit does require the installation of a fuel tank bung for the auxiliary fuel pump and also requires drilling several holes in the air box. Available in five versions; one or two 10 ounce bottles, one or two 1lb bottles. Complete instructions included with every kit.
 
Included in each kit:
  • Lightning Series Solenoids with mounting clamps
  • Fuel Tank Bung with screen
  • Throttle Position Activation Switch (TPAS) with mounting bracket
  • Two nozzles with mounting brackets
  • Polished bottle brackets
  • Polished bottle(s) and valve(s)
  • Toggle switch with mounting bracket
  • All necessary fuel and nitrous lines - All visible lines are braided stainless
  • All wiring, clamps, fittings and hardware
  • Jets included - two each of 16, 18, 20, 22, 24, 26
  • Complete installation instructions
62501 V-Rod Nitrous Kit with one 1lb polished bottle
Check Out
62502 V-Rod Nitrous Kit with two 1lb polished bottles
Check Out
62503 V-Rod Nitrous Kit with one 10oz polished bottle
Check Out
62504 V-Rod Nitrous Kit with two 10oz polished bottles
Check Out
62505 V-Rod Nitrous Kit with two 10oz polished bottles Check Out
62506 Converts single 1lb bottle kit to dual 1lb bottle kit Check Out
62507 Converts single 10oz bottle kit to dual 10oz bottle kit Check Out

Actual chart from a Dyno run on a stock 2003 V-Rod with our nitrous kit installed.