|
MIKUNI
RADIAL FLAT SLIDE CARBURETORS |
|
 |
| From
Pro Stock racers to everyday Street Bikes, MIKUNI offers a Carburetor Set
engineered for maximum performance and efficiency. Mikuni Radial Flat
Slide racing carburetors are the answer for today's high-technology high
velocity four valve per cylinder motorcycle engines. With high port
velocity, larger carburetor venturi's
can be used. The built-in accelerator pump gives instant throttle
response. Horsepower advantages can only be rivaled by very expensive
on-off type race only carburetors. Idle and choke circuits allow these
carburetors to be street driven daily without any problems. |
- Race
Only - Awesome high power range.
|
- Carburetors will use stock boots except for
KZ900-1000-1100
|
| Pingel
dual outlet valve recommended for use with these carburetors. |
| RS34-D21-K |
34mm |
KZ750,
KZ900-1000-1100, GS1000-1150, GSX600,GS750, GSXR750-1100 Center Pull.
Excellent low and mid, good high power range. |
>>>>>Go to shopping site! |
| RS36-D3-K |
36mm |
KZ900-1000-1100,
GS1000-1150, GSX600, GSXR750-1100 Center Pull |
>>>>>Go to shopping site! |
| RS38-D19-K |
38mm |
KZ900-1000-1100,
GS1000-1150, GSX600, GSXR750-1100 Center Pull |
>>>>>Go to shopping site! |
| RS40-D1-K |
40mm |
KZ900-1000-1100,
GS1000-1150, GSX600, GSXR750-1100 RACE ONLY, Center Pull |
>>>>>Go to shopping site! |
| Carbs will use stock boots except for
KZ900-1000-1100. |
| These flat slides are not applicable to
water-cooled GSXRs. |
| NOTE: GSXR750 '90-91 (49 states) require the
use of GSXR1100 '89 manifolds |
|
|
