|
Stop a runaway motorcycle
if the rider gets separated from it and no need to worry about expensive
blown engine parts from over revving with these quality Pingel Safety
Kill Switches. Highly polished 6061 billet aluminum body for the
performance-minded custom street/strip rider. Water-resistant switch,
stainless steel internal components with 24” copper wire for dependable
operation. Complete with clipped tether cord that extends to a full 50”
length. Available in 7/8”, 1”, 1-1/8” and 1-1/4” diameter, for normally
open or normally closed ignition systems, one piece, two piece and panel
mount designs. Made in the U.S.A. |
|
One-Piece
Handlebar Mount Safety Kill Switch |
| 620 |
Pingel
7/8" One-Piece Handlebar Mount Safety Kill Switch
(Normally closed circuit, battery ignition) |
|
| 621 |
Pingel
7/8" One-Piece Handlebar Mount Safety Kill Switch
(Normally open circuit, magneto ignition) |
|
| 630 |
Pingel
1" One-Piece Handlebar Mount Safety Kill Switch
(Normally closed circuit, battery ignition) |
|
| 631 |
Pingel
1" One-Piece Handlebar Mount Safety Kill Switch
(Normally open circuit, magneto ignition) |
|
| 600 |
Clipped
Red Tether Cord Only |
|
|
Two-Piece
Handlebar Mount Safety Kill Switch |
| 640 |
Pingel
7/8" Two-Piece Handlebar Mount Safety Kill Switch
(Normally closed circuit, battery ignition) |
|
|
641 |
Pingel
7/8" Two-Piece Handlebar Mount Safety Kill Switch
(Normally open circuit, magneto ignition) |
|
|
650 |
Pingel
1" Two-Piece Handlebar Mount Safety Kill Switch
(Normally closed circuit, battery ignition) |
|
|
651 |
Pingel
1" Two-Piece Handlebar Mount Safety Kill Switch
(Normally open circuit, magneto ignition) |
|
|
600 |
Clipped
Red Tether Cord Only |
|
|
Panel Mount Safety Kill Switch |
Panel Mount requires a 5/8” hole and
1-3/4” rear clearance |
| 610 |
Pingel
Panel Mount Safety Kill Switch (Normally closed circuit, battery ignition) |
|
| 611 |
Pingel
Panel Mount Safety Kill Switch (Normally open circuit, magneto ignition) |
|
| 600 |
Clipped
Red Tether Cord Only |
|
|
Safety Kill Switch
with Shift Light Bracket |
Two-piece tether kill
switch designed to mount a Dyna shift light. Made from 6061 billet
aluminum polished to a mirror finish. Available in 7/8” or 1” diameter,
normally closed circuit. Patented. NOTE: Dyna shift light sold
separately. |
| 660 |
Switch with Shift
light Bracket |
|
| 670 |
1” Safety Kill
Switch with Shift Lite Bracket |
|
| 600 |
Clipped
Red Tether Cord Only |
|
|
Safety Kill Switch
with Shift Light Bracket |
| 600B |
Black tether cord with
wristband |
|
|
Tether Safety Kill Switch |
This switch is necessary
for drag racing. This is a precision electric switch fitted in a
polycarbonate enclosure. Designed to fit all 7/8” handlebars. |
| KSB 115-002 |
Battery Style Switch (Normally
closed circuit) |
|
| KSM 115-003 |
Magneto Style Switch (Normally
open circuit) |
|
| KSB 115-002T |
Tether Cord Only |
|
624 |
| 90° Hose barb
fitting |
|
68BB |
Black button
with cup
for all 680-696 controls |
|
68KC & 68KO |
|
For kill
switches |
|
68KC - normally closed |
|
|
68KO - normally open |
|
68M & 68P |
68M - momentary switch
for all 680-696 controls |
|
68P - positive on/off
for 680P-696P controls |
|
68T |
Toggle switch
for all
controls ending in T |
|
|
|
