HomeAll ProductsContactsPrice ListDealer ApplicationOrder a CatalogSearch
Click Here to See Our Terms & Conditions                         View Cart / Check Out     Sign In

Pingel H-D AccessoriesPingel Sportbike AccessoriesAir ShiftersApparelBooks & VideosCarburetionChainClutchesDrag Accessories
Drive ComponentsElectric ShiftersElectronicsFuel ValvesHandlebar ControlsImport Engine ComponentsKill Switches
Lowering LinksNitrous SystemsRemote StartersStruts - Mono & DualTie DownsTiresToolsWheel ChocksWheelie Bars

 

Harley-Davidson Accessories

All Electric Easy Shift Kit

Clutchless & Footless
Shift up at partial or full throttle and
back down with the push of a button!

Click your make to see the units
Dyna Touring (FL's)
Softail V-Rod
Sportster Others
Kickstands for Lowered FLHs
 

 

KICKSTANDS FOR LOWERED FL

If you have lowered your Harley-Davidson FL motorcycle for improved ride height and seating position, it has probably become apparent that the stock kickstand does not account for this change. You need not modify that stock component, simply replace it with one of these “lowered” kickstands designed for just such situations with a safe lean angle even when turning the handlebars to the right when filling with fuel. Two kickstand models for front and rear lowered Harley-Davidson FL motorcycles are available. One model for 1" lowered bikes and one model for 2" lowered bikes. These kickstands are handcrafted from steel in the USA, TIG welded and then hand polished to accept smooth show quality chrome plating.  These lowered kickstands mount directly on the stock mounting bracket and utilizes the stock return spring. Unlike the stock H-D kickstand, these models have a large surface foot pad contact area to support the bike better on the ground.  The kick tab is also easily accessible for use with stock and oversized primary covers. Also available is a stock replacement kickstand which provides a less steep lean angle, which in turn reduces effort when lifting the bike off of the kickstand.  Patents Pending. 

Designed specifically for 2007-2013 FL.  Also fits years back to 1984, but lean angles may vary.

 
 
 
 
62250 Stock Replacement Kickstand
62251 1" Lowered Kickstand (1" Front and 1" Rear)
62252 2" Lowered Kickstand (2" Front and 1" Rear)
Street Billet Throttle & Grip
  62196

Harley-Davidson Street Billet Throttle & Grip

These grips feature a coarse knurl for excellent grip for performance riding. Easy to install in approximately 30 minutes with common tools. CNC machined from billet aluminum and chrome plated. Sold in pairs.

62196
Billet Throttle & Grip for 1973-2013 Harley-Davidsons that use stock push/pull throttle cable (excluding models with air assisted forks through grip) Shown at left.

 

62196 Billet Throttle & Grip
  62197

62197
Billet Throttle & Grip for 2008-2013 Harley-Davidsons with sensor type throttle.
     

62197 Billet Throttle & Grip
 
Electronics
 

Programmable Gear Indicator PGR-1000 series Gear Indicators for motorcycles are self-programming. Simply hook them up and ride through all the gears and you're done!  The PGR-1000 series programmable gear indicators can be used on any bike with an electronic speed signal. Features include:

  • 1-7 gear readout

  • Neutral indicator

  • Self-Dimming

  • Chrome Machined Aluminum Housing

  • Mounting Bracket built in

  • 2 Year Warranty

  • Available in four sizes

PGR-1 7/8" bars
PGR-1-100 1" bars
PGR-1-125 1-1/4" bars
PGR-1-150 1-1/2" bars
PGR-1000F Flush Mount
 

Pingel Enterprise, Inc. offers a variety of performance electronics for your Harley-Davidson motorcycle.  Tachometers, ignition components, shift lights, etc.  Click here to find the right parts for your motorcycle.

Drive Components
 

Harley-Davidson FL Rear Sprocket Spacer

How Wide Can You Go - Pingel Enterprise’s Rear Sprocket Spacer allows the installation of tires up to 142mm wide on 2000-2003 Harley-Davidson FL models without any other modification to the motorcycle.  Click here for more information.
 

62051 Rear Sprocket Spacer
Check Out

 

EK Drive Chain The ideal replacement for an original equipment chain.
Click here for more information.  

Fuel System Accessories
 

Bolt- On Harley-Davidson V-Rod Nitrous System

Pingel Enterprise, Inc. has designed a completely bolt on nitrous kit for the Harley-Davidson V-Rod. This “wet kit” can easily and safely increase the stock 107hp to over 140hp at the rear wheel!

Click here for more information.


 

Round Knob Inline Fuel Valve

A valve designed with the custom bike builder in mind! It gives the builder a chance to express their creativity without worrying about the fuel valve location. The valve uses simple on/off operation and does not offer any reserve capacity. 5/16” hose barbs are used for both the inlet and outlet. Chrome finish.  Click here for more information.

9040-CR-K In-line Custom Round Valve
Check Out

 

Chopper Valve

The Pingel Chopper Valve has been designed for use on motorcycles that have custom fuel tanks that are raised high in the front.  Click here for more information.

9000-C0 Chopper Valve
Check Out

 

H-D Sportster Carburetor Conversion Fitting Kit

This kit replaces the Harley-Davidson Sportster factory tank fittings allowing the use of a high quality/high flow Pingel Fuel Valve to feed the carburetor of your choice.

Click here for more information.

62079 Sportster Carburetor Conversion Kit         2007-2012
Check Out

 

Delphi Fuel Injection to Carburetor Conversion Fitting Kit

This kit replaces the factory tank fittings allowing the use of a high quality/high flow Pingel Fuel Valve to feed the carburetor of your choice.  Click here for more information. Click here to See Step by Step instructions with Photos of installation

62054 Delphi Fuel Injection to Carburetor Conv. Fitting Kit
62054P Same as above except polished

 

Magneti Marelli Fuel Injection to Carburetor Conversion Fitting Kit

This kit replaces the factory tank fittings allowing the use of a high quality/high flow Pingel Fuel Valve to feed the carburetor of your choice.  Click here for more information.

62052 Magneti Marelli Fuel Injection to Carburetor Conversion Fitting Kit
Check Out
Click here to see all our available fuel valves and accessories!
Rider Comfort
  62140 Inside View
Outside View
62141

Harley-Davidson FL Rear Lowering Brackets

This kit will lower your 1997-2013 Harley-Davidson FL (Except 2002-2013 FLHRC) 1” leaving adequate room for stock tire to fender clearance and is designed to retain the use of the stock rubber shock boot. The product makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with its lower center of gravity. Easy to install in approximately 30 minutes with common tools and includes instructions and hardware. CNC machined from billet steel with a black finish. Sold in pairs. Saddlebag modifications are necessary for installation on 2002-2013 FLHRC models.  When installing on a Road King with leather bags, the top of the bag must be spaced out 1” and the bottom of the bag must be spaced out 1.75”  The top can easily be spaced using washers between the mounts and frame.  On the bottom you must remove the rivets from the bag mounts and move them out 1.75”, drill new holes, and re-rivet them on.
 

62140 Harley-Davidson FL Rear Lowering Kit 2002-2012 (except 2002-2013 FLHRC)
Check Out
62141 Harley-Davidson FL Shock or Rear Lowering Kit 1997-2001
Check Out
 
  62130 62138 62147 62148

Harley-Davidson Road King, Dresser, Softail Floorboard Spreaders / Extenders

These items spread the floorboards on your 1993-2012 Road King or Dresser away from the bike for increased driver/passenger comfort while sitting in a more relaxed position. Will also keep feet and legs away from the fuel tank, the hot exhaust pipes, the side covers, and the chrome primary and derby cover. Works well with over-size primary covers such as the Barnett Billet Aluminum Primary Cover. Each kit includes all necessary hardware for easy installation. Kits install in minutes with simple hand tools. Sold in pairs. Made in the U.S.A.  Click here for more information.


62138 Front Spreaders 1-1/4" for 1993-2008, black finish
Check Out
62130 Passenger Spreaders 1" for 1993-2009, polished finish
Check Out
62147 Driver Spreaders 1 1/4" " for 2009-2013, black finish
Check Out
62148 Passenger Floorboard Spreaders for 2010-2013, black finish
Check Out
62149 Driver Spreaders 1 1/4" for 2009-2013 CVO, polished finish
Check Out

 

Harley-Davidson Heel Shift Eliminator

  Click here for more information.  

62139 Heel Shift Eliminator
Check Out

 

Harley-Davidson Shift Peg Extender

Having a hard time accessing your shift peg? H-D's wide gas tanks create a problem, especially for short inseam riders. This shift peg extender solves it by extending the shift peg out 1 1/2". Manufactured from billet stainless steel and highly polished.  
 
62167 H-D 1965-2013 Shift Peg Extender
Check Out

 

Harley-Davidson FL Greaseable Shifter Shaft

The shift linkage on your Harley-Davidson FL will operate smoother and with less resistance after this simple installation.   Click here for more information.  

62142 Greaseable Shifter Shaft 1982-2013
Check Out

 

Kickstand Extension

If you have problems reaching or locating your kickstand because of a wider primary cover or a short inseam you really need a Kickstand Extension.  Click here for more information.  

62168 Kickstand Extension 2007-2013
H-D FL
Check Out

 

Harley-Davidson Dyna LR Shortbones Brackets

The Short-Bones are a simple and cost effective answer for relocating the stock highway bar pegs on 1994-2005 Harley-Davidson Dyna Low Riders.  Click here for more information.  

62053 Shortbones Bracket
Check Out

 

Harley-Davidson V-Rod Windshield Risers

If you own the Super Sport Windshield for your 2002 or later V-Rod and are frustrated by your “bug-toothed smile,” you'll appreciate the increased angle our new riser offers. 
Click here for more information.
 

62050 V-Rod Windshield Risers
Check Out

 

Harley-Davidson V-Rod Windshield Relocation Kit

This kit consists of fork tube cap covers which allow the windshield to be clamped above the triple tree raising it for better wind protection for the rider while maintaining good visibility.   Must be equipped with either the Harley-Davidson Quick Release Detachable Ultimate Touring Windshield.  Click here for more information.  

62074 V-Rod Windshield Relocation Kit
Check Out
 

Harley-Davidson V-Rod Headlight Spacer Kit

The 2006 Screaming Eagle V-Rod will require a spacer which moves the headlight forward out of the way of the windshield.   

62075 V-Rod Headlight Spacer Kit
Check Out
Miscellaneous
 

Low Mount Antenna Relocation Kit for CB & Radio These antenna relocation kits are an affordable way to relocate the CB or radio antenna down low and out of the way of the detachable luggage rack or the tour pack on CB/radio equipped baggers.  Click here for more information.

62144 Rel. Kit for Radio Antenna 1985-2013
Check Out
62137 Rel. Kit for CB Antenna 1985-2008
Check Out
62145 Rel. Kit for CB Antenna 2009-2013
Check Out

 


Harley-Davidson Twin Cam Oil Pump Screens

The Twin Cam Oil Pump screens were designed to protect the oil pump and cam plate from debris off the chain-tensioners or other particles that may come loose in a twin cam engine. They are great to put in when doing a cam bearing job. You don’t always know when you remove the cams if the inner cam bearings are intact. Sometimes one little roller may drop into the center section of your engine. This roller may be sucked up through the pump, ruining a $600 pump and cam plate. With these screens, it will catch the roller and hold it until the next service on the tensioner. The screens are easy to install and to clean.

Questions Asked:
What happens when the screens plug? The oil will not scavenge out of the engine. Oil will eventually come out of the air cleaner. This is telling you that something is coming apart in the engine and it is time to service the cam area.

Do the screens cause restriction? No – in testing the engine returned the same amount of oil back to the oil tank in an allotted amount of time. It was determined that the screens de-aerated the oil more. Thus, about a 5-10 degree oil temperature drop occurs
.

62169 Twin Cam Oil Pump Screens
Check Out

 

Harley-Davidson Sportster Motor Mounts

AMERICAN MADE BY THE ORIGINATOR This 2-bolt rear mount is made of super high tensile alloy to be virtually indestructible. Click here for more information.  

RM2 Sportster Motor Mounts
Check Out